492 Royalty-Free Audio Tracks for "X Records"

Active volcano recorded from the top, at the edge of the crater, during the night. Recorded by a doublems setup by schoeps, ccm41+ccm8+ccm4 (in a cinela windscreen),an ab setup by dpa microphones, 2 x 4006,and a geofon by lom audio. On a sound devices 833 recorder. Original recording in 192khz, 24bit. This sound has been edited and mixes the different sources. Gps: -19. 530189, 169. 445493recorded on 6th of november 2022, between 6:30pm and 8:30pm. Same sound on soundcloud herehttps://soundcloud. Com/felixblume/volcano.

Bells from the church at 12:00 on sunday, recorded from the street. Light wind sometimes. Church kostel sc. Vojtecha, prague 1recorded by an ortf setup schoeps ccm4 x 2 on a cinela suspension + windscreensound devices mixpre6 recorderoriginal recording in wave 96khz 24bitgps: 50. 078476 / 14. 415440sound ref: cz-190303-002. Same sound of soundcloudhttps://soundcloud. Com/felixblume/church-bells-praguerecorded during a residency at agosto foundation in march 2019.

Me (a man) teasing my wife by going down on her, bringing her to near orgasm, stopping and fucking her. This repeats as she gets closer and louder. The sex becomes rougher and there is some choking later in the recording. I think this recording was made in 2016 using a zoom h6 and a rode ntg4 mic or possibly the x/y capsule that comes with the recorder. Note on the recording: there seem to be some silences at a couple of points. Something probably happened in the rendering. I probably won't do anything to fix this as it's just a few seconds out of 18 minutes of audio.

This is a leather rubbing foley sound, created using a tascam dr07mk2 and. . . Leather!. Long recorded track enables users to select a certain length in the track and accustom it to their film or project. Feel free to edit, cut and boost the track if needed. Some credit wouldn't hurt. Good luck filming. :). Specs:. Tascam dr07mk2. Stereo x/y pattern. 24 bit 96khz. Sampled to 16 bit 96khz. Low noise.

The sound of a suburban summer night in cincinnati, ohio where you can hear crickets (rather loud) with some faint hum of traffic off in the distance. Gear: zoom h6, xyh-6 x/y capsule (120 degree stereo image), rycote windjammer. Please feel free to leave feedback and ratings. I would love to hear how you put the sound to work.

Here is a sample of my last work "electricity sound library". I recorded some radio noises and guitar amps noise grounds with my tascam dr-40 then i processed them through additive, granular synthesis technique in logic pro x. Please leave a comment if you downloaded. You can use it under creative commons attribution license (please read before download it). This sound was originally recorded at 24 bits 96000 hz. Hope you enjoy. More sounds or music ? visit : https://audiojungle. Net/user/wakerone.

This was recorded as part of a tracking shot for a project i did a few years ago. It starts off from the exterior of a fancy london pub around the primrose hill area, walking in to a fairly packed establishment. It tracks movement into different parts of the pub. There's fairly prominent music for the first half but it eases off to barely audible later on in the audio. A few minutes in, you'll hear the bartender announce the price (6. 95) a couple of times. Recorded on zoom h6 with x/y capsule.

Sound recorded of an automatic door closing. Typologie (p. Schaeffer):x' :impulsion complexe. Morphologie:*masse: son seul principal accompagné d'un léger spectre musical composé de deux notes aigües correspondant chacune aux deux étapes de pré-fermeture de la porte. *allure: son final très sec quand les deux notes précédentes sont assez aériennes. *dynamique:entrée en matière très douce qui débouche très rapidement sur un crescendo brutal.

Two flat barges, relatively big, are docked side-by-side (at berth) and rubbing against one another due to choppy conditions. Raw audio edited to remove moments of intense, booming wind noise. Recorded on january 22, 2021 at the staten island ferry terminal & vessel depot in st. George, staten island, new york city, new york, usa on a zoom h4npro recorder with on-board x-y microphone, aimed downward at the barges from an elevated position.

Recorded in the night, you will hear a calm situation of falling raindrops without noise of civilisation. The church bell is 200 meter away. The raindrops are falling on the ground of a little deciduous forest and the whole situation is very spatial. The spatial impression is best if headphones are used. Ch1 = flch2 = frch3 = rlch4 = rr. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. ;-)https://www. Sounddevices. Com/product/wave-agent/. _________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones).

The staten island ferry "molinari" on final approach into st. George, staten island, late in the afternoon on april 04, 2021. The recording was made from the rear port side of the upper deck (where people are supposed to be quiet, but clearly don't obey the rules). Although the ambience is the in the public domain, the docking announcement over the pa system may need to be licensed through the dot. Note: this is a raw recording from a zoom h4n using the on-board x-y microphone. No processing has taken place. Ste-034. Wav, ambiance session on april 04, 2021.

A short cat conflict (he wants - she not) ;-). . . While birds are singing in the trees and a rooster is crowing then and when. Recorded in the early morning hours at round about 4:00 am. The spatial impression is best if headphones are used. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. ;-)https://www. Sounddevices. Com/product/wave-agent/. _________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones).

The beginning of a thunderstorm, from normality to first drops of rain, with approaching thunder, and eventually a full downpour. 1. There are birds picking at seeds on a nearby rooftop, which can be heard before the rain. 2. The birds flutter away just before the rain. 3. The rain starts around the 10 minute mark. 4. Full downpour starts around the 12:11 mark. Recorded on june 08, 2021 from the second floor window of an nyc apartment building, facing the inner-bay. Edited on june 12, 2021 to combine a string of takes, remove construction noise, and noise from within the apartment. This recording was made with the on-board x-y microphone of a zoom h4n pro recording device.

The sound of a construction worker operating a concrete road saw on a rainy day is heard in this recording. The recording begins with the saw already in operation, then is shut off and shortly restarted. He makes a couple of passes on the section of road he is working on and turns the machine off. A nearby siren is also heard at the end, so the shutdown at the head can be used as an alternative. Gear: zoom h6, xyh-6 x/y capsule (120 degree stereo image), rycote windjammer. Please feel free to leave feedback and ratings. I would love to hear how you put the sound to work.

This is a short, dissonant loop made with a neapolitan mandolin. This has been recorded with an sm7b into a rme interface, and quantized to 148bpm in logic pro x. This is a dry file with no other processing. I used it on a couple of old-school hip-hop beats to trigger effects or completely butchering with distortion for some extra textures. I thought it might come in handy to rap producers out there! if you do something with it, i would love to check it out!. I was recording an acoustic version of a song called "closer" by my band dead rituals, and a friend let me borrow this old neapolitan mandolin. I made some random noises by picking behind the strings at the end of a take, and i decided to sample it!.

New york city street at night, with the microphone pointed out of the second story, street-facing windows of a new york city townhouse. Moderate, night traffic. Edited to remove mic bumps and occasional sniffling/coughing. Recorded with a zoom h4n pro on january 04, 2021 around 3am with on-board x-y mic pointed straight down at the street, and traffic coming from each left/right direction.

I was standing in the middle of the newport southbank bridge facing the daniel carter beard bridge. You can hear cincinnati on the left and newport on the right while traffic pans from left and right in the stereo image. Gear: zoom h6, xyh-6 x/y capsule (120 degree stereo image), rycote windjammer, mounted on a tripod. Please feel free to leave feedback and ratings. I would love to hear how you put the sound to work.

Simulating "bone breaks" by cracking celery into pieces. The intent is to use these sounds along with "hitting" sounds to create a more dynamic punching sound effect. Although this is cc-0, if you integrate it into a more dynamic effect, i'm curious to hear it. Recorded in staten island, ny june 4, 2021 with the on board x-y mic of a zoom h4n pro from the 2nd floor window of an nyc townhouse, facing the backyard and neighboring rooftop.

A rifle being dropped on the floor 3 times. Very metallic-y sounding drop sound with tons of bass. This one was sort of a happy accident. I was recording some ak foley with an airsoft gun i had when i accidentally dropped it. The sound it made turned out so good that i ended up using it for this. I actually really like how this turned out. Crediting me isn't required if you decide to use my sound, but it would be greatly appreciated if you do!.

Overflight of 2 fighter jets (eurofighter). In quadro (in 5. 1-terms: l-r-sl-sr) you will hear them coming from front-left flying "above the head" to rear-right(roughly spoken). The 4 channels are recorded in irt-cross technique (microphone distance 25cm) so it is a 360° record. Http://irt-cross. Mozello. De_________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones). Ch1 = flch2 = frch3 = rlch4 = rr. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. Https://www. Sounddevices. Com/product/wave-agent/. Comments about this atmo-record are welcome! ;-).

I recorded this in my living room with mics in an x-pattern on the couch very close together, using a tascam dr-70d and behringer dyynamic microphones with patch cables for optimal volume. I recorded this at maximum gain on the tascam as two stereo files, then conjoined them to a 6-channel audio file properly and mixed the front two channels to a monaural center channel for added effect. The final result is what can be downloaded here. Tghe music in the background is part of the star trek: generations expanded complete score, and is coming from my computer to the rear of the recording, which lasts just over a minute in length, and the music was just background noise for testing purposes only. No copyright infringement was intended. Credit for the music goes to the now late jerry goldsmith and also dennis mccarthy, who is still alive. I hope you like this audio demonstration, and find it useful when considering rigs like the holophone, or comparible 5. 1 surround sound microphones / rigs. I take no credit for this recording, as it was done for demonstration purposes only. Have fun!.

This is an extract of the 30 minutes version of:"nightingales - concert of several nightingales in quadro. Wav"in case you do not want to download the 922mb-version. (this extract starts at 5:21 of the long version)for further description of the longer version read here:https://freesound. Org/people/bluedelta/sounds/446212/. _________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones)http://irt-cross. Mozello. De. Ch1 = flch2 = frch3 = rlch4 = rr. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. Https://www. Sounddevices. Com/product/wave-agent/. Comments about this atmo-record are welcome! ;-).

A tawny owl is shouting several times and a church bell of a church, in 200 meter distance, is ringing two times. The reverb is natural, it is no added soundeffect!. The spatial impression is best if headphones are used. Ch1 = flch2 = frch3 = rlch4 = rr. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. ;-)https://www. Sounddevices. Com/product/wave-agent/_________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones).

No it didn't. Well cool patch anyway? it's what i like. Small variations on a simple theme. Sloth lfos and a jerk off (both from nlc) are the engine. Yes and a comparator. Using an or/gate-combiner to create a trigger-ish for quadra to react on. Analog delay and spring reverb. Why did i do this patch from the very beginning? when the voltage on x from sloth reaches a specific value a trigger is generated and i sample the value on y and uses to select pitch on an oscillator. The one playing the long tones. Chaos creates my variations. Sh1t, now when i've stopped recording cool thing are happening. Promise. . .

Over 5 minutes of background noise from a well-known new york city diner, including people talking, clanging plates and glasses and forks and knives and cups being cleared away by staff, and in the second half of the clip, radio ads playing faintly in the background. But crucially, no music is playing. This means you can either use this clean, or layer in your own rights-cleared music if you're using this in a film or whatever. Recorded in january 2019 with an iphone x — don't let the recording device scare you, it sounds pretty good and certainly fine for this kind of background noise. Use it in any way you like for any purpose. Update: i just uncovered a similar recording i made in 2016 at a different diner, and uploaded that here: https://freesound. Org/people/edlundart/sounds/515719/ pick whichever one you prefer, or use a combination of both!. Warmly,bard edlund, edlundart. Com.

4-channel hq record of a sudden and heavy thunderstrike (nearly) without rain in the afternoon of a hot summerday. The recording equipment was prepared for recording thunder, so there is no distortion, no compression or (auto)gain reduction done by a limiter in the zoom f8, means the whole dynamic is still there and will be audible by a adequate monitor/audio equipment. ;-)the sound was not edited or otherwise enhanced with effects. This file can be used as a intro followed by my other track (link below), which has soft rain at the beginning, before the thunder comes. . . ;-https://freesound. Org/people/bluedelta/sounds/367222/. The 4 channels are recorded in irt-cross technique (microphone distance 25cm) so it is a 360° (4x90°) record. Http://irt-cross. Mozello. De_________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones). Ch1 = flch2 = frch3 = rlch4 = rr. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. Https://www. Sounddevices. Com/product/wave-agent/. Comments about this atmo-record are welcome! ;-). . . And you can help others to find this sound easier by (star)rating this track.

4-channel record of a rolling thunder. The record is slow downed to 0,7-speed. The thunder has now very deep frequencies, which can shake your house, if you have the right equipment to play the file. The 4 channels are recorded in irt-cross technique (microphone distance 25cm) so it is a 360° record. Http://irt-cross. Mozello. Deat the end of the track the rain moves to the front channels. (fade is starting at 1:20 min and is finished at 1:41min)my other track can be used for "intro" followed by this track. See/hear here for the intro option:https://freesound. Org/people/bluedelta/sounds/446753/. The spatial impression is best if headphones are used. Ch1 = flch2 = frch3 = rlch4 = rr. The download-file is a polywav. If you need to split the file (e. G. To make a stereo file), you can use the easy to use"wave agent beta"(free)from sound devices for example. ;-)_________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones).

I recorded this from a balcony (5th floor) in the middle of a summer day (end of july), using a mid/side set (mkh30 + c480 b-uls/ck62-df omni) into sound devices mixpre3. Not any processing has been added, except a plain m/s to x/y stereo conversion and low-cut filter (30hz). This is a generally quiet atmo, sometimes light wind comes in, some seagulls and other birds are there at times, some construction work happens etc. The traffic noise is present, but in the distant way. Feel free to use it in any of your productions. Not for resale.

A diesel flatbed tow truck idles for two minutes, moves the truck into position,backup warning beeps, moves the car back, adjusts the position of the truck once more, extends the rollback tilt-tray, connects the car, winches the car up, retracts the rollback tilt-tray, secures chains to the car, then drives off. Gear: zoom h6, xyh-6 x/y capsule (120 degree stereo image), rycote windjammer. Please feel free to leave feedback and ratings. I would love to hear how you put the sound to work.

A recording of flushing the toilet’s water, followed by a groaning door closing sound. Production stages : this sound was originally recorded by a group of students at university lyon 3. Then it was imported to audacity where few modifications were made. First of all, the record was precisely cut so there are no human voices in the background. Then, the sound was normalized and slightly compressed before applying the noise reduction effect. Last, but not least a constant gain was added at the beginning and lightly fading effect took his place at the end. Son du type x (continu complexe)c’est un groupe nodal des sons saturés avec une hauteur variée, suivis d’un bruit d’une haute hauteur. Le son est cannelé et constant et finisse par le son de la porte qui est métallique et aigul’attaque du son est rapide et forte, plutôt abrupte. Le grain est frémissement et rugueuxet l’allure est naturelle, désordonnée et aléatoire.

This sound is completely analog. I recorded the sound of a person who was walking on the street. I chose to leave the noise of the street so that we understand that the person walks outside. I used the effect "amplification" to reduce the noise of the street and increase the sound of step. I made a fade in opening and closing, so that we have the impression that the steps are moving towards us then moves away. At the same time, i played with the pitch of the sound to accentuate this effect. Descriptif selon la typologie de schaeffer :code : x''précisions morphologie :- masse : groupe nodal / complexe- timbre harmonique : terne- grain : rugeux- allure : ne comporte pas de vibrato- dynamique : l’attaque est douce et graduelle- profil mélodique : scalaire- profil de masse : le son paraît plus calibré.

This is the ambience i created for my sci-fi sitcom accidentally reckless of a dropship of some kind approaching a battlefield (and certain death). The bare bones was created from a field recording of the x-1 bus going down attercliffe road towards sheffield city centre, during a period in 2017 when they were constantly resurfacing the stretch that goes past the swingers club, resulting in the bone shaking rattling sounds you can hear. I then layered on some laser and rocket noises (already uploaded) and some engine type sound effects and shuttle flypast effects that i don't think i've uploaded yet. I hope it's useful for someone else and no need to credit. Just share the freesound love!.

This racing vehicles recording 2 track. It might be viable for use in racing and driving video games. But over the past few years, games emerged as some of the top-selling products in video and computer gaming. The main focus in such a project would be on generating a score by merging a few sounds in the background of the soundtrack (such as bumping or breaking) with specific vehicle sound effects (such as braking). Loops would be used to affect pre-composed music, using live data to change the mix and instrumental direction (such as the dynamics, texture or timbre), or even the pitch, rhythm or tempo), moreover, the musical soundtrack for racing vehicle gameplay could be stored in a memory card to use in digital sport car sounds unit that convenient sound effects according to the processes, which is essential to participate in the training driver by granting the user with more information. In real life, the driver has more sensory information.

Chinese restaurant (portugal) about 10 x 10 mts large with 20 people inside. Sunday 9pm. Chatter (portuguese + other), chairs dragging, some noise from the street behind the big glass window in front; noise from the kitchen (cutting vegetables on wood, frying on wok, chatter in chinese). Mic pointing at the center of the room. In front a big avenue (door closed). On my right/behind is the kitchen on an open space. Recorded with zoom h4n-pro 48 khz / 24 bit. Use freely on your personal commercial and non-commercial projects. Don't put this raw sounds/files on youtube or anywhere else. You can use them in creative way as a part of art-form, but not "re-distribute" as (royalty free) stock material. Thank you.

Made some adjustements and a new recording. Terrible result but fun work/programming!. Algorithmic drone music program. The computer is my analog modular synth. 01 to 08 are clock sequencer steps. 00 rem osc_1 - wave shaped sin oscillator (osc) - tuned to 130hz00 rem osc_2 - clean sin from oscillator - tuned to 130hz00 rem osc_3 - sqr from oscillator through filter - osc tuned to 130hz00 rem clk speed = 0. 5 hz00 rem line 01 each of the 3 vcas gets an unique cv value ([gate] -> [3 s/h] -> [3 vca])00 rem ---------------------------------------------------01 sample values for vca (cv in) x 3 (osc_1, osc_2, osc_3)02 sample frq for osc_103 sample frq for osc_204 sample new clk speed05 sample frq for vibrato in osc_106 sample frq for osc_307 env to all vca08 sample cv for (osc_3) filter10 goto 01. When i begin the recording the program has been running for a while.

A stockholm, sweden commuter rail x60 train (alstom coradia nordic) on the then j35 (bålsta - nynäshamn) line arriving at and leaving from the älvsjö station. It was a cold day, if i recall correctly between -10 to -20°c (-5 to 15°f) and there was about 1 or 2 centimeters (1/4 to 1/2 inch) of powdery snow. 00:00 warning signal at crossing (for commuter train employees only) with train arriving in background. 00:21 footsteps in cold thin snow layer00:25 squealing as the train comes to a stop00:36 doors opening00:41 driver announcing that the train will depart for stockholm central station and bålsta station00:55 warning sound before doors are closing and more footsteps00:58 doors closing01:11 squealing as the train start to roll. Recorded friday december 18, 2009, 10:01 am (utc + 1 h), with the built in mic of a canon digital ixus 950 is camera (which could be used to record audio only). File straight off from the camera with the exception of id3 tags added with foobar2000 v1. 3. 4.

Another recording of rain and thunder, but in some ways a better one. This one is a surprisingly big crack and rumble preceded and followed by a nice sounding rain. I made this by positioning a stereo-matched pair of akg c451b condenser mics in an exaggerated x-y configuration (a wider stereo field) and aiming them out of my open window. The mics went into a universal audio 2-610 preamp, an apogee duet 2, and then ableton at 48khz and 24 bits. I believe i had the mics set flat, and there was no post processing (though i was mightily tempted to upload the much-better-sounding eqed and compressed files) so that you can fine tune it to suit your needs. You'll notice that the loudest parts of the thunder boom clipped the input, but, due to the pleasant and forgiving nature of vacuum tubes, the clipping sounds more compressed than distorted. Feel free to use this sound in any commercial or artistic work! you do not need to credit me.

Algorithmic drone music program. The computer is my analog modular synth. 01 to 08 are clock sequencer steps. 00 rem osc_1 - wave shaped sin oscillator (osc) - tuned to 130hz00 rem osc_2 - clean sin from oscillator - tuned to 130hz00 rem osc_3 - sqr from oscillator through filter - osc tuned to 130hz00 rem clk speed = 0. 5 hz00 rem line 01 each of the 3 vcas gets an unique cv value ([gate] -> [3 s/h] -> [3 vca])00 rem ---------------------------------------------------01 sample values for vca (cv in) x 3 (osc_1, osc_2, osc_3)02 sample frq for osc_103 sample frq for osc_204 sample new clk speed05 sample frq for vibrato in osc_106 sample frq for osc_307 env to all vca08 sample cv for (osc_3) filter10 goto 01. When i begin the recording the program has been running for a while.

Td-3-tg recorded with zoom h-1. Td was performing slide through octaves with "slide" button pressed in program, and subsequent cs were played, in octave -1 and 0, and higher c in octave 0 and +1, back and forth. Program takes 7 16th notes and the space between notes takes 9 rests. Tempo of the td-3 was set to maximum and the volume control was set to high amount, to let zoom h-1 with rec level setting to 37, be driven up to -6db. Sound recorded in 96khz and 24bits. Trimmed and saved in flstudio edison, what made sound 32bit. No amplify, no normalisation. "tune" knob of td-3 was set to maximum as well as "cut off", "envelope" and "accent". "resonance" and "decay" was set to one o'clock. "waveform" swicth was set to square. No distortion. Zoom h-1 was plugged by a cable, td-3 output to line in. Cable was named vitalco - 1/8 inch trs to 1/4 ts, male to male, 3m.

I was recording outside my bedroom window while eating dinner in the living room, then i came back in here to see if i got anything interesting. I was zooming through the recording at 5x speed when i came across this bit of incidental pareidolia. I'm not sure what was going on, maybe the neighbors' stereo, but i don't remember hearing it, it's much louder in the living room so i should have. Whatever it was came out as a little distant choppy 2-notes alternating melody when played at 5x speed, which suddenly gets louder and solid as you hear the lower note followed by a third lower note. These 2 louder notes sound to me like someone singing the words all day. This would lead me to believe the original tones have some light harmonics i don't hear at normal speed. After which it goes back to the softer stuttering 2-note alternating thing from before. It doesn't sound like much at all at normal speed. So i just did a few straight pitch changes with goldwave until i got to 5x and saved this little file. See if it sounds like "all day" to you.

I'm attempting to create a controllable thunderstorm for a film, and this is my first legitimate attempt. This recording consists of 4 samples of rain, and another 3 samples of rain+thunder that i recorded one afternoon. Equipment used was the inbuilt mics on a roland r-26, and a sennheiser me66 into a sound devices 702. The clips were recorded at 96khz/24-bit, and they were processed at 48khz/24-bit. For processing, i put the samples into kyma, and crossfaded for texture. The howling wind sound is an analog-style low pass filter's frequency, level, and resonance being controlled by a wacom intuos4 pen/tablet. The rain slowly swells, which was done by changing parameters of a granular reverb. The thunder was also controlled by the wacom tablet, with x, y, and z (pressure) dimensions mapped to making the thunder swell in level, density, and texture. This could have been output in surround, but i don't have that many monitors ;). This style of "rain-synthesis" can also go on indefinitely. Please let me know what you think of the quality of this track; eg, if it sounds real, if the wind sounds ridiculous, too much thunder, etc. Use this sound (wherever) if you want to, or let me know if you'd like an mp3 of this, or for it to last longer. I'd like some credit if you do use it, but it's no big deal. A blog is up explaining the method of creation here:http://www. Kylehughesaudio. Com/2/post/2013/02/tempest. Html.

This is a failed attempt at sampling a rock drumkit on 6 tracks. The channels are as follows:. 0: oh l1: oh r2: kick3: snare4: room l5: room r. I've captured this into ardour 5. 12 using 3 different audio interfaces:. Behringer umc202hd - overheads (dynamic mics)line 6 pod studio ux2 - kick and snare (condenser + dynamic)zoom h2 - room ambience (built-in xy condenser mics). This file is a 6-channel 24-bit flac file encoded using ffmpeg from the raw wav files exported from the original ardour session. There are several issues with this recording however:. 1. The tracks seem to drift, because the individual audio interface clocks were not in sync. The proper way to record multitrack audio is using a single multichannel audio interface - but i didn't have one. 2. There's either x-runs or some usb transfer issues creating small glitches and dropouts in various tracks her and there. Don't know why did this happen, as we've been tracking the real drummer's performance without these issues. Now - fixing these issues manually would be an insane amount of work, but i hope maybe someone has means to either solve them with programming a special tool, or know a tool that could fix these, and make this recorded session ready to be sliced as a drumkit for say - drumgizmo. There's some really good stuff in here - an i was able to cut and mix some really nice drum samples, that i've been using for years, but it's not ready to be fully sliced for maximum flixibility. The instrument was played by myself - it's a drumset by pearl (don't remember the details), owned by the drummer of a band i recorded this with. The band was called small hint - hence the drumkit name. We were recording an ep, and i used some free time left to capture this as well. The ep was never finished and we disbanded soon after. Regarding fixing the issues - here's what i think needs to be done:. 1. I think each hit would have to be automatically phase-aligned on all 6 channels, to correct for the drift. 2. I think it should be possible to automatically detect clicks by simply watching for a sudden change in amplitude between adjacent samples - marking bad areas and then using something like audacity's repair effect to interpolate the waveforms. I think the glitches have much steeper changes in amplitude than even the drum transients, so it should be possible to differentiate between those automatically. If you found a way to fix at least some of these problems - please let me know!. If you've made some "remixes" on freesound - i'd also love to know that. Apart from that - sample what you can out of this and make some sick drum tracks!.